LIKE US on Facebook FOLLOW US on Twitter WATCH US on youTube Accreditations | Contact Us

Press Brakes

Press Brakes

Holford Synergy has a range of Press Brake machinery and tooling at its site in Bedford to suit all our customer requirements.

One of Holford Synergy’s fully trained CNC operators will create a program by choosing relevant punch and die top and bottom tooling depending on steel gauge thickness and finished radius required, before programming the sequence of folds either resting  on or pushing up to independent back stops.

Tooling Options:

V-Dies: a common type of dies, the bottom dies can be made with different sized die openings to handle a variety of materials and bend angles

90 degree dies: largely used for bottoming operations, the die opening dimension depends on material thickness.

Acute angle (air bending) dies: used in air bending, these can actually be used to produce acute 90 degree and obtuse angles by varying how deeply the punch enters the die by adjusting the ram.

Gooseneck (return flanging) dies: the punch is designed to allow for clearance of already formed flanges.

Offset dies: a combination punch and die set that bends two angles in one stroke to produce a Z shape.

Hemming dies: two stage dies combining an acute angle die with a flattening tool.

Beading dies: a bead or a stopped rib may be a feature that stiffens the resulting part; the punch has rounded head with flat shoulders on each side of the bead. The bottom die is the inverse of the punch.

Four way die blocks: a single die block may have a V machined into each of four sides for ease of change over for small jobs.

Channel forming dies: a punch can be pressed into a die to form two angles at the bottom of the sheet forming an angular channel.

Box forming dies: while a box may be formed by simple angle bends on each side the different side lengths of a rectangular box must be accommodated by building the punch in sections. The punch also needs to be high enough to accommodate the height of the resulting box sides.

Multiple bend dies: a die set may be built in the shape of the desired profile and form several bends on a single stroke of the press.

Contact Us
Arnold Wragg Ltd
Unit 2
Parkway One Business Centre
Parkway Drive
Sheffield
S9 4WU

Telephone: 0114 251 9050
Fax: 0114 244 6635
Email: sales@arnold-wragg.com
GT Engineering Ltd
Unit 4
Pulloxhill Business Park
Greenfield Road
Pullo, Bedford
MK45 5EU

Telephone: 0152 571 5440
Fax: 0152 571 8585
Email: info@gtengineering.co.uk
Holford Engineering Ltd
Cromwell Road
Eynesbury
St. Neots
Cambridgeshire
PE19 2HP

Telephone: 01480 217 271
Fax: 01480 219 687
Email: info@holford.uk.com
Barwell Spares & Services
3 Lyon Close
Woburn Road Industrial Estate
Kempston
Bedford
MK42 7SB

Telephone: 01234 852 915
Fax: 01234 840 124
Email: info@barwell.eu.com